Raspberry Pi Camera Module 3

KShs5,200.00

The Raspberry Pi Camera Module 3 is the latest addition to the Official Raspberry Pi range of camera modules. It features a new 12 Megapixel Sony IMX708 image sensor, improved low-light sensitivity, and HDR support for both photos and videos.

The Camera Module 3 is available with a standard 75° or wide-angle 120° lens. It is capable of capturing 4608×2592 pixel images and recording 4608×2592 @14 FPS/2304×1296 @56 FPS/1536×864 @120FPS video. The resolution is limited to 2304×1296 @ 30 FPS when HDR is enabled. This particular model features the standard 75° lens.

The Camera Module 3 is mechanically identical to the previous Camera Module V2, except for the front sensor section. It is compatible with all Raspberry Pi boards that have a camera connector (CSI connector). However, an adapter cable is needed to use this camera with a Raspberry Pi Zero.

The Camera Module 3 requires the use of libcamera, and the previous raspistill/raspivid libraries will not work. Raspberry Pi OS needs to be updated to a specific version of libcamera as the Camera Module 3 requires a new driver.

The documentation for the Camera Module 3 can be found here

18 in stock

Product Specification

  • Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3 megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast mode plus)
  • 2-wire serial control of focus mechanism
  • Resolution: 11.9 megapixels
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/vertical: 4608 × 2592 pixels
  • Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filter: Integrated in standard variants; not present in NoIR variants
  • Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  • Ribbon cable length: 200mm
  • Cable connector: 15 × 1mm FPC

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

×

Hello!

Click one of our contacts below to chat on WhatsApp

× This is not a Bot.